Thông tin chi tiết
Packet processor Marvell 98DX3333A1-BTD4I000 (PonCat3 Industrial)
Interfaces
- 8х10/100/1000BASE-T PoE/PoE+
- 4x100BASE-FX/1000BASE-X (SFP)
- Console port RS-232 (RJ-45)
Performance - Bandwidth - 24 Gbps
- Throughput for 64 bytes - 17.8 MPPS
- Buffer memory - 1.5 MB
- RAM (DDR3) - 512 MB
- ROM (RAW NAND) - 512 MB
- MAC table - 16K
- VLAN table - 4094
- L2 Multicast groups - 4K
- ARP table1 - 4K
- Link Aggregation Groups (LAG) - 48, up to 8 ports per LAG
- Maximum size of ECMP groups - 8
- Quality of Service (QoS) - 8 egress queues per port
- TCAM:
- for traffic processing: 3K x 24B
- for routing: 13K
- Jumbo frames size - 10240 bytes
Interfaces functions - HOL blocking protection
- Back Pressure
- Auto MDI/MDIX
- Jumbo frames
- IEEE 802.3X flow control
- Port mirroring
MAC table functions - Independent mode of learning for each VLAN
- MAC Multicast Support
- Automatic MAC addresses aging
- Static MAC Entries
- MAC Flapping logging
VLAN functions - Voice VLAN
- IEEE 802.1Q
- Q-in-Q
- Selective Q-in-Q
- GVRP
L2 Multicast functions - Multicast profiles
- Multicast static groups
- IGMP Snooping v1,2,3
- Port/host based IGMP Snooping Fast Leave
- Pim-Snooping
- IGMP proxy-report
- Support for IGMP autorization via RADIUS
- MLD Snooping v1,2
- IGMP Querier
- MVR
L2 functions - STP (Spanning Tree Protocol, IEEE 802.1d)
- RSTP (Rapid Spanning Tree Protocol, IEEE 802.1w)
- MSTP (Multiple Spanning Tree Protocol, IEEE802.1s)
- STP Multiprocess
- PVSTP+
- RPVSTP+
- Spanning Tree Fast Link option
- STP Root Guard
- STP Loop Guard
- BPDU Filtering
- STP BPDU Guard
- Loopback Detection (LBD) based on VLAN
- EAPS2
- ERPS (G.8032v2)
- Flex-link
- Private VLAN
- Layer 2 Protocol Tunneling
L3 functions - Static IP routes
- Dynamic routing protocols: RIPv2, OSPFv2, OSPFv3, BGP3
- BFD
- Address Resolution Protocol (ARP)
- Proxy ARP
- Policy-Based Routing (IPv4)
- VRRP
- Multicast routing protocols: PIM SM, PIM DM, IGMP Proxy, MSDP
- ECMP load balancing
- IP Unnumbered
Link Aggregation functions - Static LAG
- Dynamic LAG (LACP)
- LAG Balancing Algorithms
- Multi-Switch Link Aggregation Group (MLAG)
IPv6 functionsService functions - Virtual Cable Testing (VCT)
- Optical transceiver diagnostic
- Green Ethernet
Security functions - DHCP Snooping
- DHCP option 82
- IP Source Guard
- Dynamic ARP Inspection
- First Hop Security
- sFlow
- MAC-based authentication, Port Security, static MAC entries
- Port-based authentication IEEE 802.1x
- Guest VLAN
- DoS attack prevention
- Traffic segmentation
- Protection against non-authorized DHCP servers
- DHCP client filtering
- BPDU attack prevention
- NetBIOS/NetBEUI filtering
- PPPoE Intermediate Agent
ACL - L2-L3-L4 ACL (Access Control List)
- Time-Based ACL
- IPv6 ACL
- ACL based on:
- Physical port number
- IEEE 802.1p
- VLAN ID
- Ethertype
- DSCP
- Protocol type
- TCP/UDP port number
- User Defined Bytes
Quality of service (QoS) and rate limiting - QoS statistics
- Port rate limiting (shaping, policing)
- IEEE 802.1p CoS
- Storm Control
- Bandwidth management
- Scheduling algorithms: Strict Priority/Weighted Round Robin (WRR)
- Three marking colors
- ACL-based CoS/DSCP mark assignment
- ACL-based VLAN mark assignment
- 802.1p priorities adjustment for Management VLAN
- CoS to DSCP, DSCP to CoS remarking
- 802.1p DSCP mark assignment for IGMP
ОАМ/CFM - IEEE 802.3ah Ethernet Link OAM
- Dying Gasp
- IEEE 802.1ag Connectivity Fault Management (CFM)
- IEEE 802.3ah Unidirectional Link Detection
Management functions - Configuration file download and upload via TFTP
- SNMP (Simple Network Management Protocol)
- Command line interface (CLI)
- Redirection of CLI output to a file in ROM
- Web interface
- Syslog
- SNTP (Simple Network Time Protocol)
- Traceroute
- LLDP (802.1ab) including LLDP MED support
- Configuration of user privilege level
- Management interface blocking
- Local authentication
- IP addresses filtering for SNMP
- RADIUS and TACACS+ (Terminal Access Controller Access Control System) clients
- SSH server
- SSL
- Macrocommands
- CLI commands logging
- DHCP autoprovision
- DHCP Relay (Option 82)
- DHCP Option 12
- DHCPv6 Relay, DHCPv6 LDRA (Option 18, 37)
- PPPoE Circuit ID tag
- Flash File System
- Debugging commands
- Traffic to CPU rate limiting
- Password encryption
- Password recovery
- Ping (IPv4/IPv6)
- FTP server2
- DNS server (Resolver)
Monitoring functions - Interface statistics
- RMON/SMON
- CPU utilization monitoring per task and traffic type
- RAM monitoring
- Temperature monitoring
- TCAM utilization monitoring
MIB/IETF - RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
- RFC 1212 Concise MIB Definitions
- RFC 1213 MIB II
- RFC 1215 MIB Traps Convention
- RFC 1493, 4188 Bridge MIB
- RFC 1157, 2571-2576 SNMP MIB
- RFC 1901-1908, 3418, 3636, 1442, 2578 SNMPv2 MIB
- RFC 271,1757, 2819 RMON MIB
- RFC 2465 IPv6 MIB
- RFC 2466 ICMPv6 MIB
- RFC 2737 Entity MIB
- RFC 4293 IPv6 SNMP Mgmt Interface MIB
- Private MIB
- RFC 3289 DIFFSERV MIB
- RFC 2021 RMONv2 MIB
- RFC 1398, 1643, 1650, 2358, 2665, 3635 Ether-like MIB
- RFC 2668 802.3 MAU MIB
- RFC 2674, 4363 802.1p MIB
- RFC 2233, 2863 IF MIB
- RFC 2618 RADIUS Authentication Client MIB
- RFC 4022 MIB for TCP
- RFC 4113 MIB for UDP
- RFC 3298 MIB for Diffserv
- RFC 2620 RADIUS Accounting Client MIB
- RFC 2925 Ping & Traceroute MIB
- RFC 768 UDP
- RFC 791 IP
- RFC 792 ICMPv4
- RFC 2463, 4443 ICMPv6
- RFC 4884 Extended ICMP for Multi-Part messages support
- RFC 793 TCP
- RFC 2474, 3260 Definition of the DS field in the IPv4 and IPv6 headers
- RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
- RFC 2571, RFC2572, RFC2573, RFC2574 SNMP
- RFC 826 ARP
Physical specifications and ambient parameters - Power supply
- with PoE enabled: 45–57 VDC
- with PoE disabled: 20–57 VDC
- Maximum power consumption (including PoE) - 260 W
- PoE budget - 240 W (for 802.3at applications, 54–56 VDC is recommended)
- Reverse polarity protection - yes
- Signal relay - one signal relay output: 1 A 24V DC
- Operating temperature - from -40 to +70° С
- Storage temperature - from -50 to +85° С
- Humidity - from 5 to 95% (non-condensing)
- Cooling - passive cooling
- Case - metal, IP30
- Form-factor - DIN-rail for wall mounting (optional in supply package)
- Dimensions (WxHxD) - 85х175х115 mm
- Weight - 1.74 kg