Ethernet Access Switch MES2408C Ethernet Access Switch MES2408C Key features Advanced L2 features Support for Multicast (IGMP Snooping, MVR) Advanced security functions (L2-L4 ACL, IP SourceGuard, Dynamic ARP Inspection, etc.) MES2408x series switches provide connection of end users to networks of large enterprises, small and mid-sized businesses and service providers via Gigabit Ethernet interfaces. The switches support Virtual Local Area Networks (VLAN), multicast groups and advanced security functions.  MES2408C Eltex Số lượng: 0 Cái
Ethernet Access Switch MES2408C

Ethernet Access Switch MES2408C

Giá bán: Liên hệ

Thông tin chi tiết


Technical features

  • Packet processor Realtek RTL8382M
  • 8 ports 10/100/1000BASE-T 
  • 2 ports Combo 10/100/1000BASE-T/100BASE-FX/1000BASE-X
  • Console port RS-232/RJ-45
  • Bandwidth 20 Gbps
  • Throughput for 64-byte packets 14.88 MPPS
  • MAC table 8K
  • TCAM table 1.5K
  • Jumbo frame size: the maximum packet size is 10 000 bytes
  • Buffer memory 512 KB
  • RAM (DDR3) 256 MB
  • ROM (SPI Flash) 32 MB
  • L2 Multicast groups (IGMP Snooping) 509
  • Quality of Service (QoS) 8 output queues per port
Interface features
  • Head-of-line blocking (HOL) protection
  • Auto MDI/MDIX
  • Jumbo frames
  • Flow Control IEEE 802.3X
  • Port mirroring
  • RSPAN 

MAC table
  • Independent learning mode per VLAN
  • MAC Multicast Support
  • MAC change events monitoring per ports
  • Configurable aging time of MAC addresses
  • Static MAC Entries
  • MAC flapping events monitoring per ports
VLAN features
  • IEEE 802.1Q
  • Q-in-Q
  • Selective Q-in-Q (VLAN Translation)
L2 Multicast features
  • Multicast profiles
  • Static Multicast groups
  • IGMP Snooping v1,2,3
  • Port-based IGMP Snooping Fast Leave
  • IGMP proxy-report features
  • MLD Snooping v1,2
  • IGMP Querier
  • MVR
L2 features
  • STP (Spanning Tree Protocol, IEEE 802.1d)
  • RSTP (Rapid Spanning Tree Protocol, IEEE 802.1d)
  • MSTP (Multiple Spanning Tree Protocol, IEEE 802.1s)
  • STP Root Guard
  • STP Loop Guard
  • STP BPDU Guard
  • BPDU Filtering
  • Spanning Tree Fast Link option
  • Layer 2 Protocol Tunneling
  • Loopback Detection (LBD)
  • Port isolation
  • Storm Control for different types of traffic (broadcast, multicast, unknown unicast)
Link Aggregation functions
  • Static LAG
  • Dynamic LAG (LACP)
  • LAG Balancing Algorithm
Service functions 
  • Virtual cable testing (VCT)
  • Optical transceiver diagnostics
IPv6
  • IPv6 Host
  • Dual-stack
Quality of service (QoS) and rate limiting
  • Shaping, policing
  • Support for IEEE 802.1p Class of Service
  • Scheduling algorithms: Strict Priority/Weighted Round Robin (WRR)
  • IEEE 802.1p priority for management VLAN
  • ACL-based traffic classification
  • ACL-based CoS/DSCP mark assignment
  • CoS to DSCP remarking
  • DSCP to CoS remarking
  • ACL-based VLAN assignment
    Security functions
    • DHCP Snooping
    • DHCP Option 82
    • IP Source Guard
    • Dynamic ARP Inspection (Protection)
    • MAC-based authentication, Port Security, static MAC entries
    • DoS attacks prevention
    • Traffic segmentation
    • DHCP clients filtering
    • BPDU attacks prevention
    • PPPoE Intermediate agent
    Access control lists (ACL) 
    • L2-L3-L4 ACL (Access Control List)
    • IPv6 ACL
    • ACL based on:
      • Switch port
      • IEEE 802.1p priority
      • VLAN ID
      • EtherType
      • DSCP 
      • IP type 
      • TCP/UDP port number
      • User Defined Bytes 
      Main management functions
      • Download and upload of configuration file via TFTP/SFTP
      • Automated backup of configuration file via TFTP/SFTP
      • Simple Network Management Protocol (SNMP)
      • Command LIne Interface (CLI)
      • Syslog
      • Simple Network Time Protocol (SNTP)
      • Traceroute
      • LLDP (IEEE 802.1ab) + LLDP MED
      • Access management – privilege levels for users
      • Management interface blocking
      • Local authentication
      • IP addresses filtering for SNMP
      • RADIUS and TACACS+ clients
      • SSH server
      • SSL
      • Input commands logging via TACACS+
      • DHCP autoprovision
      • DHCP Relay (support for IРv4)
      • DHCP Relay Option 82
      • PPPoE Circuit-ID tag adding
      • Flash File System
      • Debugging commands
      • Limiting of traffic to CPU
      • Password encryption
      • Ping (support for IPv4/IPv6)
      • IPv4/IPv6 static routes support
      • Support for several versions of configuration file
       ОАМ
      • IEEE 802.3ah, Ethernet OAM
      • Dying Gasp
      • IEEE 802.3ah Unidirectional Link Detection (UDLD)
        Monitoring functions 
        • Interface statistics
        • CPU utilization monitoring per task and per queue
        • RAM utilization monitoring
        • Temperature monitoring
        • TCAM monitoring
        Physical specifications and ambient parameters
        • Power supply: 220 VAC, 50 Hz
        • Maximum power consumption 10 W
        • Hardware support for Dying Gasp
        • Operating temperature: from -20 to +50 °С 
        • Storage temperature: from -40 to +70 °С
        • Operating humidity: no more than 80%
        • Cooling: passive
        • Dimensions (WxDxH), mm: 310x177x44
        • Waight 1,77 kg